Networking with Windows Server 2016: 70-741 exam. Share the latest 70-741 dumps and Practice test questions for free. Real and effective exam questions and answers. 70-741 pdf online Download, 70-741 YouTube video online learning to improve skills! Examthings share 30 Practice test questions for FREE! Get the full 70-741 exam dumps: https://www.lead4pass.com/70-741.html (Total questions:240 Q&A)
[PDF] Free Microsoft MCSA 70-741 pdf dumps download from Google Drive: https://drive.google.com/open?id=1DNB40m4ZzhtEFScQcPZ7PeiWFbXfIFUa
[PDF] Free Full Microsoft pdf dumps download from Google Drive: https://drive.google.com/open?id=1AwBFPqkvdpJBfxdZ3nGjtkHQZYdBsRVz
Exam 70-741: Networking with Windows Server 2016 – Microsoft: https://www.microsoft.com/en-us/learning/exam-70-741.aspx
Latest effective Microsoft MCSA 70-741 Exam Practice Tests
QUESTION 1
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may
be correct for more than one question in the series. Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question.
You have a DHCP server named Server1 that has three network cards. Each network card is configured to use a static
IP address.
You need to prevent all client computers that have physical address beginning with 98-5F from leasing an IP address
from Server1.
What should you do?
A. From the properties of Scope1, modify the Conflict detection attempts setting.
B. From the properties of Scope1, configure Name Protection.
C. From the properties of IPv4, configure the bindings.
D. From IPv4, create a new filter.
E. From the properties of Scope1, create an exclusion range.
F. From IPv4, run the DHCP Policy Configuration Wizard.
G. From Control Panel, modify the properties of Ethernet.
H. From Scope1, create a reservation.
Correct Answer: E
QUESTION 2
You have a DHCP server named Server1 that runs Windows Server 2016.
You plan to implement IPv6 on your network.
You need to configure Server1 for stateless DHCPv6.
What should you do from the DHCP console?
A. Configure the Advanced Properties for Server1
B. Configure the IPv6 Server Options
C. Create an IPv6 scope
D. Configure the General IPv6 Properties
Correct Answer: B
QUESTION 3
You have a server named Server1 that runs Windows Server 2016 and is configured as a domain controller.
You install the DNS Server server role on Server1.
You plan to store a DNS zone in a custom Active Directory partition.
You need to create a new Active Directory partition for the zone.
What should you use?
A. Set-DnsServer
B. Active Directory Sites and Services
C. Dns.exe
D. Dnscmd.exe
Correct Answer: D
https://technet.microsoft.com/en-us/library/ee649181(v=ws.10).aspx
QUESTION 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a member server named
Server1 that runs Windows Server 2016 and has the DNS Server role installed. Automatic scavenging of state records
is
enabled and the scavenging period is set to 10 days.
All client computers dynamically register their names in the contoso.com DNS zone on Server1.
You discover that the names of multiple client computers that were removed from the network several weeks ago can
still be resolved. You need to configure Server1 to automatically remove the records of the client computers that have
been
offline for more than 10 days.
Solution: You run the dnscmd.exe command and specify the /AgeAllRecords parameter for the zone.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B
QUESTION 5
You have a server that is configured as a hosted BranchCache server.
You discover that a Service Connection Point (SCP) is missing for the BranchCache server.
What should you run to register the SCP?
A. setspn.exe
B. Reset-BC
C. ntdsutil.exe
D. Enable-BCHostedServer
Correct Answer: D
https://technet.microsoft.com/en-us/library/jj862376(v=ws.11).aspx
QUESTION 6
You have Hyper-V host named Server1.
Server1 has a network adapter that has virtual machine queue (VMQ) enabled. The network adapter connects at 10
Gbps and has an IPv4 address.
Server1 hosts a virtual machine named VM1. VM1 has a single network adapter and four processors.
You need to distribute the network processing load across the VM1 processors.
What should you do?
A. From Device Manager on Server1, configure TCP Checksum Offload (IPv4).
B. From Device Manager on VM1, configure TCP Checksum Offload (IPv4).
C. From Device Manager on VM1, configure Receive Side Scaling.
D. From Windows PowerShell on Server1, run the Enable-NetAdapterRSS cmdlet.
Correct Answer: C
QUESTION 7
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is
repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is
exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows
Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets.
The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the
Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table. 
You need to create a zone to ensure that Server1 can resolve single-label names. What should you name the zone on
Server1?
A. . (root)
B. WINS
C. NetBIOS
D. GlobalNames
Correct Answer: D
https://technet.microsoft.com/en-us/library/cc816610(v=ws.10).aspx
QUESTION 8
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is
repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is
exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows
Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets.
The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.
Client computers obtain TCP/IP settings from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the
Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table. 
You need to ensure that when a record is added dynamically to fabrikam.com, only the computer that created the record
can modify the record. The solution must allow administrators to modify all of the records in fabrikam.com. What should
you do?
A. Change fabrikam.com to an Active Directory-integrated zone.
B. Raise the functional level of the domain.
C. Modify the security settings of the Fabrikam.com.dns file.
D. Modify the Start of Authority (SOA) settings of fabrikam.com
Correct Answer: A
https://technet.microsoft.com/en-us/library/cc753751(v=ws.11).aspx
QUESTION 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1.
Server1 and VM1 run Windows Server 2016.
The settings for VM1 are configured as shown in the exhibit below.
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You need to enable the Data Exchange integration service for VM1. Does this meet the goal?
A. YES
B. NO
Correct Answer: A
QUESTION 10
You have multiple servers that run Windows Server 2016 and are configured as VPN servers.
You deploy a server named NPS1 that has Network Policy Server (NPS) installed.
You need to configure NPS1 to accept authentication requests from the VPN servers.
What should you configure on NPS1?
A. From RADIUS Clients and Servers, add a remote RADIUS server group.
B. From Policies, add a connection request policy.
C. From Policies, add a network policy.
D. From RADIUS Clients and Servers, add RADIUS clients.
Correct Answer: D
QUESTION 11
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named
Server1. All client computers run Windows 10 and are configured as DHCP clients. Your helpdesk received calls today
from
users who failed to access the network from their Windows 10 computer.
You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that all of the Windows 10 computers can receive a DHCP lease.
Solution: You activate the scope.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
https://technet.microsoft.com/en-us/library/dd183581(v=ws.10).aspx
QUESTION 12
You have multiple servers that run Windows Server 2016 and are configured as VPN servers.
You deploy a server named NPS1 that has Network Policy Server (NPS) installed.
You need to configure NPS1 to accept authentication requests from the VPN servers.
What should you configure on NPS1?
A. From RADIUS Clients and Servers, add a remote RADIUS server group.
B. From Policies, add a connection request policy.
C. From Policies, add a network policy.
D. From RADIUS Clients and Servers, add RADIUS clients.
Correct Answer: D
QUESTION 13
You have a Scale-Out File Server that has a share named Share1. Share1 contains a virtual disk file named Disk1.vhd.
You plan to create a guest failover cluster.
You need to ensure that you can use the virtual disk as a shared virtual disk for the gust failover cluster.
Which cmdlet should you use?
A. Optimize VHD
B. Optimize VHDSet
C. Convert-VHD
D. Set-VHD
Correct Answer: A
QUESTION 14
You have an Active Directory domain that contains several Hyper-V hosts that run Windows Server 2016.
You plan to deploy network virtualization and to centrally manage Datacenter Firewall policies.
Which component must you install for the planned deployment?
A. the Data Center Bridging feature
B. the Network Controller server role
C. the Routing role service
D. the Canary Network Diagnostics feature
Correct Answer: B
QUESTION 15
Your network contains three subnets, a production subnet that contains production servers, a development network that
contains development servers, and a client network that contains client computers.
The development network is used to test applications and reproduces servers that are located on the production
network. The development network and the production network use the same IP address range.
A developer has a client computer on the client network. The developer reports that when he attempts to connect to the
IP address 10.10.1.6 from his computer, he connects to a server on the production network. You need to ensure that
when the developer connects to 10.10.1.6, he connects to a sever on the development network
Which cmdlet should you use?
A. New-NetNeighbor
B. New-NetRoute
C. Set-NetTcpSetting
D. Set-NetNeighbir
Correct Answer: B
QUESTION 16
You have an Active Directory forest that contains 30 servers and 6,000 Client computers. You deploy a new DHCP
server that runs Windows Server 2016. You need to retrieve the list of the authorized DHCP servers. Which command
should you run?
A. Get-DHCPServerDatabase
B. Netstat -p IP -s -a
C. Get-DHCPServerInDc
D. Show-ADAuthenticationPolicyExpression -AllowedToAuthenticateTo
Correct Answer: C
To get all authorized DHCP servers in Active Directory, you can use the following PowerShell cmdlet: Get-
DhcpServerinDC
QUESTION 17
You have a Hyper-V host named Server1 that runs Windows Server 2016. Server1 has multiple network adapters that
have virtual machine queue (VMQ) enabled. On Server1, you create a virtual machine named VM1 as shown in the
exhibit.
You need to ensure that you can use virtual Receive-side Scaling (vRSS) on VM1. What should you do?
A. Add additional memory.
B. Add additional processors.
C. Add additional network adapters.
D. Enable the Data Exchange integration service.
Correct Answer: B
References: https://docs.microsoft.com/en-us/windows-server/networking/technologies/vrss/vrss-top
QUESTION 18
You have two DNS servers named Server1 and Server2.
All client computers run Windows 10 and are configured to use Server1 for DNS name resolution.
Server2 hosts a primary zone named contoso.com.
Your network recently experienced several DNS spoofing attacks on the contoso.com zone.
You need to prevent further attacks from succeeding.
What should you do on Server??
A. Configure the contoso.com zone to be Active Directory-integrated.
B. Sign the contoso.com zone.
C. Configure DNS-based Authentication of Named Entities (DANE) for the contoso.com zone.
D. Configure Response Rate Limiting (RRL).
Correct Answer: B
QUESTION 19
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,
while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server.
Server1 is configured to allow domain users to establish VPN connections from 06:00 to
18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Active Directory Users and Computers, you modify the Dial-in Properties of the user accounts. Does this
meet the goal?
A. Yes
B. No
Correct Answer: A
QUESTION 20
You have an IP Address Management (IPAM) server named IPAM1 that runs Windows Server 2016. IPAM1 manages
10 DHCP servers.
You need to provide a user with the ability to track which clients receive which IP addresses from DHCP. The solution
must minimize administrative privileges.
A. IPAM MSM Administrators
B. IPAM ASM Administrators
C. IPAM IP Audit Administrators
D. IPAM User
Correct Answer: C
References: https://technet.microsoft.com/en-us/library/jj878348(v=ws.11).aspx
QUESTION 21
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,
while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London,
Paris and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2016.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin
sites.
Solution: You install the Deployment Server role service, and then you restart the World Wide Web Publishing Service.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
QUESTION 22
You have servers named Server1 and DHCP1. Both servers run Windows Server 2016.
DHCP1 contains an IPv4 scope named Scope1.
You have 1,000 client computers.
You need to configure Server1 to lease IP addresses for Scope1. The solution must ensure that Server1 is used to
respond to up to 30 percent of the DHCP client requests only.
You install the DHCP Server server role on Server1.
What should you do next?
A. From the DHCP console, run the Configure Failover wizard.
B. From Server Manager, install the Network Load Balancing feature.
C. From Server Manager, install the Failover Clustering feature.
D. From the DHCP console, create a superscope.
Correct Answer: A
QUESTION 23
You have an IP Address Management (IPAM) deployment that is used to manage all of the DNS servers on your
network. IPAM is configured to use Group Policy provisioning.
You discover that a user adds a new mail exchanger (MX) record to one of the DNS zones.
You want to identify which user added the record.
You open Event Catalog on an IPAM server, and you discover that the most recent event occurred yesterday. You need
to ensure that the operational events in the event catalog are never older than one hour.
What should you do?
A. From the properties on the DNS zone, modify the refresh interval.
B. From an IPAM_DNS Group Policy object (GPO), modify the Group Policy refresh interval.
C. From Task Scheduler, modify the Microsoft\Windows\IPAM\Audit task.
D. From Task Scheduler, create a scheduled task that runs the Update-IpamServer cmdlet.
Correct Answer: A
QUESTION 24
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution. After you answer a question in this sections, you will NOT be able to return to
it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named
Server2 than runs Windows Server 2016.
Users report that their client computers fail to obtain an IP address.
You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)
Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.
You need to ensure that all of the client computers on the network can obtain an IP address from Server2.
Solution: You run the Set-DhcpServerv4MulticastScope cmdlet.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B
QUESTION 25
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named
Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration.
You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries
from all other DNS clients.
Solution: From Windows Firewall with Advanced Security on Server1, you create an inbound rule.
Does this meet the goal?
A. Yes
B. No
Correct Answer: B
QUESTION 26
You have a remote access server named Server1 that runs Windows Server 2016. Server1 has DirectAccess enabled.
You have a proxy server named Server2. All computers on the internal network connect to the Internet by using the
proxy.
On Server1, you run the command Set-DAClient -forceTunnel Enabled.
You need to ensure that when a DirectAccess client connects to the network, the client accesses all the Internet
resources through the proxy.
What should you run on Server1?
A. Set-DnsClientNrptRule
B. Set.DANetworkLocationServer
C. Set-DAClient
D. Set-DAServer
Correct Answer: C
QUESTION 27
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,
while
others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named
Server2 than runs Windows Server 2016.
Users report that their client computers fail to obtain an IP address.
You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)
Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.
You need to ensure that all of the client computers on the network can obtain an IP address from Server2.
Solution: You run the Set-DhcpServerv4Scope cmdlet.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
https://technet.microsoft.com/itpro/powershell/windows/dhcp-server/set-dhcpserverv4scope
QUESTION 28
You have a Microsoft Azure subscription and an on-premises network.
To the on-premises network, you deploy a new server named Server1 that runs Windows Server 2016. In Azure, you
configure a virtual gateway on an Azure virtual network.
You need to ensure that the computers on the on-premises network can access virtual machines on the Azure virtual
network.
What should you do on Server1?
A. Install the Remote Access server role. From the Routing and Remote Access Server Setup Wizard, select Secure
connection between two private networks.
B. Install the Data Center Bridging (DCB) feature, and then run the Install-RemoteAccess cmdlet.
C. Install the Remote Access server role. From the Routing and Remote Access Server Setup Wizard, select Virtual
private network (VPN) access and NAT.
D. Install the Data Center Bridging (DCB) feature, and then run the Enable-RemoteAccessRoutingDomain cmdlet.
Correct Answer: A
QUESTION 29
You company has a main office in London. The company has 1,000 users who are located in many countries.
You plan to deploy a large remote access solution for the company.
The London office has three servers named Server1, Server2, and Server3 that run Windows Server 2016.
You plan to use Server1 as a VPN server, Server2 as a RADIUS proxy, and Server3 as a RADIUS server.
You need to configure Server2 to support the planned deployment.
Which three actions should you perform on Server2? Each correct answer presents part of the solution.
A. Create a connection request policy.
B. Deploy a Windows container.
C. Add a RADIUS client.
D. Create a network policy.
E. Create a remote RADIUS server group.
Correct Answer: ACE
QUESTION 30
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution. Determine whether the solution meets the stated goals.
Refer to exhibit:
Server1 has two virtual machines named VM1 and VM that run Windows Server 2016. VM1 connects to Private VM2
has two network adapters.
You need to ensure that VM1 connects to the corporate network by using NAT.
Solution: You connect VM1 to Internal1. You run the New-NetNatIpAddress and the New-NetNat cmdlets on Server1.
You configure VM1 to use VM2 as the default gateway.
Does this meet the goal?
A. Yes
B. No
Correct Answer: A
We offer more ways to make it easier for everyone to learn, and YouTube is the best tool in the video. Follow channels: https://www.youtube.com/channel/UCXg-xz6fddo6wo1Or9eHdIQ/videos get more useful exam content.
Latest Microsoft MCSA 70-741 YouTube videos:
Share 30 of the latest and effective 70-741 exam dumps and Practice test questions for free, 100% real and effective exam questions and answers! Get the full 70-741 dumps:https://www.lead4pass.com/70-741.html
(Total questions:240 Q&A)
[PDF] Free Microsoft MCSA 70-741 pdf dumps download from Google Drive: https://drive.google.com/open?id=1DNB40m4ZzhtEFScQcPZ7PeiWFbXfIFUa
[PDF] Free Full Microsoft pdf dumps download from Google Drive: https://drive.google.com/open?id=1AwBFPqkvdpJBfxdZ3nGjtkHQZYdBsRVz
Lead4pass Promo Code 12% Off
related 100-105 exam dumps: https://www.examscode.com/best-cisco-100-105-dumps-pdf/
