NSE6 dumps

[High Quality Microsoft Dumps] High Quality Latest NSE6 Dumps Questions And Answers, 2020 New NSE6 Dumps PDF Practice Files Free Download

The best and most updated NSE6 dumps pdf training resources which are the best for clearing NSE6 exam test, download one of the many PDF readers that are available for free. https://www.leads4pass.com/nse6.html dumps pdf questions and answers. High quality NSE6 dumps exam training materials in PDF format, 100% success and guarantee to pass NSE6 exam test easily at first try.

Downloaf Free Latest NSE6 Dumps PDF Materials: https://drive.google.com/open?id=0B_7qiYkH83VRSHYySXJTWV9HVTQ

Downloaf Free Latest NSE4 Dumps PDF Materials: https://drive.google.com/open?id=0B_7qiYkH83VRaE1sNFV5ems4Tmc

QUESTION 1
Which correctly define “Section View” and “Global View” for firewall policies? (Choose two.) NSE6 pdf
A. Section View lists firewall policies primarily by their interface pairs.
B. Section View lists firewall policies primarily by their sequence number.
C. Global View lists firewall policies primarily by their interface pairs.
D. Global View lists firewall policies primarily by their policy sequence number.
E. The ‘any’ interface may be used with Section View.
Answer: AD

QUESTION 2
What protocol cannot be used with the active authentication type?
A. Local
B. RADIUS
C. LDAP
D. RSSO
Answer: D

QUESTION 3
What determines whether a log message is generated or not?
A. Firewall policy setting
B. Log Settings in the GUI
C. ‘config log’ command in the CLI
D. Syslog
E. Webtrends
Answer: A
NSE6 dumps
QUESTION 4         NSE6 dumps
Which of the following are considered log types? (Choose three.)
A. Forward log
B. Traffic log
C. Syslog
D. Event log
E. Security log
Answer: BDE

QUESTION 5
When configuring LDAP on the FortiGate as a remote database for users, what is not a part of the configuration?
A. The name of the attribute that identifies each user (Common Name Identifier).
B. The user account or group element names (user DN).
C. The server secret to allow for remote queries (Primary server secret).
D. The credentials for an LDAP administrator (password).
Answer: C

QUESTION 6
Examine this log entry. What does the log indicate? (Choose three.)
date=2013-12-04 time=09:30:18 logid=0100032001 type=event subtype=system level=information vd=”root” user=”admin” ui=http(192.168.1.112) action=login status=success reason=none profile=”super_admin” msg=”Administrator admin logged in successfully from http(192.168.1.112)” NSE6 pdf
A. In the GUI, the log entry was located under “Log & Report > Event Log > User”.
B. In the GUI, the log entry was located under “Log & Report > Event Log > System”.
C. In the GUI, the log entry was located under “Log & Report > Traffic Log > Local Traffic”.
D. The connection was encrypted.
E. The connection was unencrypted.
F. The IP of the FortiGate interface that “admin” connected to was 192.168.1.112.
G. The IP of the computer that “admin” connected from was 192.168.1.112.
Answer: BEG

QUESTION 7
Where are most of the security events logged? NSE6 dumps
A. Security log
B. Forward Traffic log
C. Event log
D. Alert log
E. Alert Monitoring Console
Answer: C

QUESTION 8
In “diag debug flow” output, you see the message “Allowed by Policy-1: SNAT”. Which is true?
A. The packet matched the topmost policy in the list of firewall policies.
B. The packet matched the firewall policy whose policy ID is 1.
C. The packet matched a firewall policy, which allows the packet and skips UTM checks
D. The policy allowed the packet and applied session NAT.
Answer: B

QUESTION 9
What attributes are always included in a log header? (Choose three.)
A. policyid
B. level
C. user
D. time
E. subtype
F. duration
Answer: BDE

QUESTION 10
What log type would indicate whether a VPN is going up or down?
A. Event log
B. Security log
C. Forward log
D. Syslog
Answer: A

QUESTION 11
When an administrator attempts to manage FortiGate from an IP address that is not a trusted host, what happens?
A. FortiGate will still subject that person’s traffic to firewall policies; it will not bypass them.
B. FortiGate will drop the packets and not respond.
C. FortiGate responds with a block message, indicating that it will not allow that person to log in.
D. FortiGate responds only if the administrator uses a secure protocol. Otherwise, it does not respond
Answer: B

QUESTION 12
A backup file begins with this line: #config-version=FGVM64-5.02-FW-build589-140613:opmode=0:vdom=0:user=admin #conf_file_ver=3881503152630288414 #buildno=0589 #global_vdom=1 Can you restore it to a FortiWiFi 60D? NSE6 dumps
A. Yes
B. Yes, but only if you replace the “#conf_file_ver” line so that it contains the serial number of that specific FortiWiFi 60D.
C. Yes, but only if it is running the same version of FortiOS or a newer compatible version.
D. No
Answer: D

Read more: https://www.leads4pass.com/nse6.html dumps exam training materials.

Watch the video to learn more:

https://youtu.be/e3b7WK-xFas

[High Quality Microsoft Dumps] Download Free Latest Microsoft NSE6 Dumps PDF Questions And Answers, The Best NSE6 Dumps Exam Training Materials

High quality latest NSE6 dumps exam practice files and training materials online free update. The best and most updated Microsoft Dynamics 365 NSE6 dumps pdf training resources and study guides. dumps pdf questions and answers. 100% success and guarantee to pass NSE6 exam test easily at first try.

QUESTION 1
The FortiGate unit can be configured to allow authentication to a RADIUS server. NSE6 pdf The RADIUS server can use several different authentication protocols during the authentication process. Which of the following are valid authentication protocols that can be used when a user authenticates to the RADIUS server? (Select all that apply.)
A. MS-CHAP-V2 (Microsoft Challenge-Handshake Authentication Protocol v2)
B. PAP (Password Authentication Protocol)
C. CHAP (Challenge-Handshake Authentication Protocol)
D. MS-CHAP (Microsoft Challenge-Handshake Authentication Protocol v1)
E. FAP (FortiGate Authentication Protocol)
Correct Answer: ABCD

QUESTION 2
SSL content inspection is enabled on the FortiGate unit. Which of the following steps is required to prevent a user from being presented with a web browser warning when accessing an SSL-encrypted website?
A. The root certificate of the FortiGate SSL proxy must be imported into the local certificate store on the user’s workstation.
B. Disable the strict server certificate check in the web browser under Internet Options.
C. Enable transparent proxy mode on the FortiGate unit.
D. Enable NTLM authentication on the FortiGate unit. NTLM authentication suppresses the certificatewarning messages in the web browser.
Correct Answer: A

QUESTION 3
Which of the following statements are correct about the HA diag command diagnose sys ha reset-uptime? (Select all that apply.)
A. The device this command is executed on is likely to switch from master to slave status if master override is disabled.
B. The device this command is executed on is likely to switch from master to slave status if master override is enabled.
C. This command has no impact on the HA algorithm.
D. This command resets the uptime variable used in the HA algorithm so it may cause a new master to become elected.
Correct Answer: AD

QUESTION 4
Review the IPsec diagnostics output of the command diag vpn tunnel list shown in the Exhibit. NSE6 dumps
NSE6 dumps
Which of the following statements is correct regarding this output? (Select one answer). NSE6 pdf
A. One tunnel is rekeying
B. Two tunnels are rekeying
C. Two tunnels are up
D. One tunnel is up
Correct Answer: C

QUESTION 5
Which of the following is an advantage of using SNMP v3 instead of SNMP v1/v2 when querying the FortiGate unit?
A. Packetencryption
B. MIB-based report uploads
C. SNMP access limits through access lists
D. Running SNMP service on a non-standard port is possible
Correct Answer: A

QUESTION 6
Which of the following statements is correct about how the FortiGate unit verifies username and password during userauthentication?
A. If a remote server is included in a user group, it will be checked before local accounts.
B. An administrator can define a local account for which the password must be verified by querying a remote server.
C. If authentication fails with a local password, the FortiGate unit will query the authentication server if the local user is configured with both a local password and an authentication server.
D. The FortiGate unit will only attempt to authenti ate against Action Directory if Fortinet Server Authentication Extensions are installed and configured.
Correct Answer: B

QUESTION 7
Caching improves performance by reducing FortiGate unit requests to the FortiGuard server. NSE6 dumps Which of the following statements are correct regarding the caching of FortiGuard responses? (Select all that apply.)
A. Caching is available for web filtering, anti pam, and IPS requests.
B. The cache uses a small portion of the FortiGate system memory.
C. When the cache is full, the least recently used IP address or URL is deleted from the cache.
D. An administrator can configure the number of seconds to store information in the cache before the FortiGate unit contacts the FortiGuard server again.
E. The size of the cache will increase to accomodate any number of cached queries.
Correct Answer: BCD

QUESTION 8
Which of the following statements is correct regarding the NAC Quarantine feature?
A. With NAC quarantine, files can be quarantined not only as a result of antivirus scanning, but also for other forms of content inspection such as IPS and DLP.
B. NAC quarantine does a client check on workstations before they are permitted to have administrative access to FortiGate.
C. NAC quarantine allows administrators to isolate clients whose network activity poses a security risk.
D. If you chose the quarantine action, you must decide whether the quarantine type is NAC quarantine or File quarantine.
Correct Answer: C

QUESTION 9
When an administrator attempts to manage FortiGate from an IP address that is not a trusted host, what happens? NSE6 pdf
A. FortiGate will still subject that person’s traffic to firewall policies; it will not bypass them.
B. FortiGate will drop the packets and not respond.
C. FortiGate responds with a block message, indicating that it will not allow that person to log in.
D. FortiGate responds only if the administrator uses a secure protocol. Otherwise, it does not respond
Answer: B

QUESTION 10
What advantages are there in using a hub-and-spoke IPSec VPN configuration instead of a fully-meshed set of IPSec tunnels? (Select all that apply.)
A. Using a hub and spoke topology is required to achieve full redundancy.
B. Using a hub and spoke topology simplifies configuration because fewer tunnels are required.
C. Using a hub and spoke topology provides stronger encryption.
D. The routing at a spoke is simpler, compared to a meshed node.
Correct Answer: BD

QUESTION 11
When the SSL proxy inspects the server certificate for Web Filtering only in SSL Handshake mode, which certificate field is being used to determine the site rating?
A. Common Name
B. Organization
C. OrganizationalUnit
D. Serial Number
E. Validity
Correct Answer: A

QUESTION 12
Which of the following statements is not correct regarding virtual domains (VDOMs)? NSE6 dumps
A. VDOMs divide a single FortiGate unit into two or more virtual units that function as multiple, independent units.
B. A management VDOM handles SNMP, logging, alert email, and FDN-based updates.
C. A backup management VDOM will synchronize the configuration from an active management VDOM.
D. VDOMs share firmware versions, as well as antivirus and IPS databases.
E. Only administrative users with a super_admin profile will be able to enter all VDOMs to make configuration changes.
Correct Answer: C